In this report we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and techniques which you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the garden and other regions of the home, you will need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup which will look a little scary at first, but it’s really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask http://www.sviluppoinsiemesivince.eu/best-cheap-dog-food-finding-perfect-type-inexpensive-dog-food/ so you get something that looks like a cone. The most important thing here is to be realistic with what kind of paper plate that you’re using.

Then you will need to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can ensure that nothing will leak once you put the mask on. Make sure the edges are cut so the edges are not sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask first, so you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wash away any excess paint after you are done, so you don’t wind up with smudges or smears on your dog.

Then it is time to glue the mask on your dog’s head. First you will need to be certain that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you can start to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and fold it over. Be sure that it’s quite strong and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you’ve got the mask snugged securely onto the face of your dog. Don’t make the folds too big or else it might look messy. As soon as you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Be sure the ears are level and make certain it is not too short or long as this can cause some issues with the mask slipping off the dog’s face.

If you are using a dog mask because your dog protection, you will need to do some sanding to make certain it’s safe on your dog. You can do this by sanding off any excess paper which might have been removed from your mask.